These water heaters utilize a draft diverter and are atmospherically vented with capacities ranging from 29 to 60 gallons and inputs ranging from 30,000-50,000 BTU's. These models are perfect for many standard water heating applications.

• 10 Models (29-60 gallon capacities)
• 30,000-50,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Advanced ScreenLok® Technology Flame Arrestor design
• Resettable thermal switch
• Piezo ingiter
• Maintenance free
• Pedestal base
• Sight window
• Fully automatic controls
• actory installed Hydrojet® Total Performance System
• Vitraglas® lining
• ¾" NPT factory installed dielectric waterway fittings
• Protective magnesium anode rod
• "3" x "4" Snap-Lock draft diverter on 40,000 BTU/Hr. or less models
• T&P relief valve included
• Brass drain valve
• 1" Non-CFC foam insulation

These models utilize a draft diverter and are atmospherically vented. A self diagnostic millivolt powered gas control valve assists in trouble-shooting and start up procedure. The thermopile system converts heat energy from the pilot flame into electrical energy to operate the control system. No need for external electricity.

• 2 Models (75 and 100 gallon capacities)
• 76,000-85,000 BTU/Hr.

Features:

• Millivolt powered gas control valve
• Piezo igniter
• Self diagnostic gas control with LED display
• Separate water temperature well
• Fully automatic temperature controls
• Factory installed Hydrojet 2™ Total Performance System
• Vitraglas® lining
• ¾" NPT side connections
• Non-CFC foam insulation
• M-I-75 has 1" NPT & M-I-100 has 1¼" NPT factory installed dielectric waterway fittings
• Protective magnesium anode rod
• 4" "Snap Lock" draft diverter
• T&P relief valve installed
• Brass drain valve

These models utilize a draft diverter and are atmospherically vented. A self diagnostic millivolt powered gas control valve assists in trouble-shooting and start up procedure. The thermopile system converts heat energy from the pilot flame into electrical energy to operate the control system. No need for external electricity.

• Extra Recovery - More hot water in less time!
• 1 Model (75 Gallon Capacity)
• 76,000 BTU/Hr.

Features:

• Millivolt powered gas control valve
• Piezo igniter
• Self diagnostic gas control with LED display
• Separate water temperature well
• Fully automatic temperature controls
• Factory installed Hydrojet 2™ Total Performance System
• Vitraglas® lining
• ¾" NPT side connections
• 2" Non-CFC foam insulation
• 1" NPT factory installed dielectric waterway fittings
• Protective magnesium anode rod
• 4" "Snap Lock" draft diverter
• T&P relief valve installed
• Brass drain valve

These models are the most energy efficient, atmospheric vent residential product we offer. Additional insulation and integral heat traps combine to reduce stand-by heat loss. The additional insulation also helps these models achieve Energy Factor (EF) ratings that qualify for most utility rebate programs.

• High Energy Factor (EF) Ratings- These models qualify for most energy rebate programs as well as the January 1st, 2009 minimum ENERGY STAR® EF requirement
• 5 Models (30-60 gallon capacities)
• 32,000-40,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Advanced ScreenLok® Technology Flame Arrestor design
• Resettable thermal switch
• Piezo ingiter
• Maintenance free
• Pedestal base
• Sight window
• Fully automatic controls
• Factory installed Hydrojet® Total Performance System
• Vitraglas® lining
• ¾" NPT factory installed dielectric waterway fittings
• Protective magnesium anode rod
• "3" x "4" Snap-Lock draft diverter
• T&P relief valve included
• 2" Non-CFC foam insulation
• Brass drain valve

These High Performance Series™ water heaters provide incredible hot water delivery from a space saving, convenient package. When tested to the industry standard residential First Hour Delivery procedure, the 25-gallon model (GX2-25S) can provide 155 gallons and the 55-gallon model (GX1-55S) will deliver 200 gallons.

• High first hour delivery
• 2 models (25-55 gallon capacities)
• 78,000-80,000 BTU/Hr.

Features:

• High Input Combustion System
• Optimizer™ Temperature Control System
• Factory installed Hydrojet 2™ Total Performance System
• Vitraglas® lining
• Fully automatic controls
• ¾" NPT side connections
• Non-CFC Foam Insulation
• ¾" NPT factory installed dielectric waterway fittings
• Two Protective magnesium anode rods
• 4" "Snap Lock" Draft Diverter
• Helical Fin Flue
• T&P relief valve installed
• Brass drain valve

Eco-Defender Safety System® Ultra Low NOx Series water heaters from Bradford White utilize the latest advances in technology and materials for an ecologically friendly line of water heaters. Eco-Defender models emit 75% less NOx emissions than standard models while maintaining optimal combustion efficiencies, and consistent operational temperatures. Each and every one meets the most stringent air quality requirements for allowable NOx emissions in the country.

• 19 Models (30-65 gallon capacities)
• 30,000-55,000 BTU/Hr.
• FVIR Eco-Defender Safety System®
• U4 models qualify for most utility rebate programs as well as the January 1st, 2009 ENERGY STAR® EF requirement

Features:

• Defender Combustion Chamber—Advanced ScreenLok® Technology Flame Arrestor
• Ultra Low NOx Burner with Primary and Secondary Air Distribution Devices
• Digital thermal sensor and resettable thermal switch
• Millivolt powered control with built-in piezo igniter
• Pedestal base
• Maintenance free
• Sight Window—view into the combustion chamber
• No electricity required.
• Factory installed Hydrojet® Total Performance System
• Vitraglas® lining
• Self diagnostic honeywell gas control
• Side connections—3/4" NPT tappings (XR models only).
• Non-CFC foam insulation
• Protective magnesium anode rod
• T&P relief valve included
• Brass drain valve
• Meets SCAQMD rule 1121 (10ng/J NOx limit)

Our TTW®1 models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2" or 3" PVC, ABS or CPVC pipe.

• Vertical or Horizontal Venting up to 120 ft. (with 3" PVC, ABS, CPVC)
• 3 Models (40, 50 and 60 gallon capacities)
• 40,000-42,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Advanced ScreenLok® Technology Flame Arrestor Design
• Flammable vapor sensor
• Pedestal base
• Maintenance free
• Sight Window
• Powerful blower motor
• ¾" NPT factory installed dielectric waterway fittings
• Power Vented Water Heater
• Spark to pilot ignition system
• Horizontal and Vertical Venting
• Vitraglas® lining
• Protective magnesium anode rod
• Factory installed Hydrojet® Total Performance System
• 1" Non-CFC Foam Insulation
• Electronic gas control valve
• Brass drain valve
• T&P relief valve included

Like the TTW®1, TTW®2 models are also power vented but offer higher BTU/Hr. inputs, additional insulation and larger gallon capacities. The TTW®2 also offers greater installation flexibility with the ability to vent through a wall or roof, with either 3" or 4" PVC, ABS or CPVC pipe.

• Vertical or Horizontal Venting up to 180 ft. (with 4" PVC, ABS, CPVC)
• 3 Models (48, 65 and 75 gallon capacities)
• 65,000-76,000 BTU/Hr.
• FVIR Defender Safety System® on models 75,000 BTU/Hr. and below

Features:

• Powerful blower motor
• Spark to pilot ignition system
• Electronic gas control valve
• Power Vented Water Heater
• Electronic ignition
• Horizontal and Vertical Venting
• Vitraglas® lining
• ¾" NPT side connections for space heating
• Protective magnesium anode rod
• ¾" NPT factory installed dielectric waterway fittings
• Factory Installed Hydrojet® 2TM Total Performance System
• 2" Non-CFC Foam Insulation
• Brass drain valve
• T&P relief valve Included

Bradford White's direct vent (DS) water heaters utilize a co-axial (pipe inside a pipe) vent pipe that takes air in from the outside (outer vent) and vents combustion gases directly back to the outside (outer vent). It is the perfect choice for situations with insufficient combustion air. No electricity required.

• Closed Combustion, Uses Outside Air for Combustion
• 2 Models (40 and 50 gallon capacities)
• 38,000-42,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Fully automatic controls
• ¾" NPT factory installed dielectric waterway fittings
• Co-axial rotational venting
• Optional vent kit allows up to 8' horizontal and 8' vertical venting extensions
• Factory Installed Hydrojet® Total Performance System
• Vitraglas® lining
• No electrical power necessary
• Protective magnesium anode rod
• Piezo igniter
• T&P valve included
• Brass drain valve
• 1" Non-CFC foam insulation
• Reinforced seals
• Closed Combustion

Our High-Input Direct Vent (DH) water heaters offer greater recovery capabilities, larger gallon capacities and side connections for space heating. These too utilize a co-axial (pipe inside a pipe) venting system. No electricity required.

• Closed Combustion, Uses Outside Air for Combustion
• Higher Inputs and gallon capacities
• 3 Models (48, 65 and 75 gallon capacities)
• 50,000-60,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Fully automatic controls
• ¾" NPT factory installed dielectric waterway fittings
• Co-axial rotational venting
• ¾" NPT side tappings for space heating
• Optional vent kit allows up to 8' horizontal and 8' vertical venting
• Factory Installed Hydrojet® Total Performance System
• Vitraglas® lining
• No electrical power necessary
• Protective magnesium anode rod
• Piezo igniter
• T&P valve Included
• Reinforced seals
• Brass drain valve
• 1" Non-CFC foam insulation
• Closed Combustion

Power Direct Vent models are the solution to installations that lack sufficient air for combustion and require installation flexibility. All models can vent vertically or horizontally and are also approved for unbalanced, direct-vent closed combustion applications.

• Closed Combustion, Uses Outside Air for Combustion
• Higher Inputs and gallon capacities
• 3 Models (48, 65 and 75 gallon capacities)
• 60,000-70,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Factory Installed Hydrojet® Total Performance System
• Vitraglas® lining
• ¾" NPT factory installed dielectric waterway fittings
• ¾" NPT side connections for space heating
• T&P valve included
• Brass drain valve
• 2" Non-CFC foam insulation, 1" on PDX-2-65T
• Optional concentric vent kit termination
• Vertical or horizontal venting
• Flammable vapor sensor
• Electronic gas control
• Closed Combustion
• Powerful blower motor
• Spark-to-pilot ignition

Designed specifically for mobile homes, this heater operates in the same manner as a conventional gas-powered water heater. The most noticeable difference is it narrow width that allows it to fit in tight spaces.

• 2 Models (30 and 40 gallon capacities)
• 32,000-34,000 BTU/Hr.
• FVIR Defender Safety System®

Features:

• Fully automatic controls
• ¾" NPT factory installed dielectric waterway fittings
• Roof jack package for installation flexibility
• Vitraglas® lining
• Protective magnesium anode rod
• T&P relief valve opening
• Brass drain valve
• 1" Non-CFC foam insulation
• Advanced Screenlok® Technology Flame Arrestor Design
• Resettable thermal switch
• Piezo igniter
• Pedestal base
• Sight Window
• Convertible Gas Control Valve

As with the energy saver atmospheric combustion model, its direct vent counterpart is also designed for mobile homes. This version takes combustion air in from outside and then vents combustion gases directly back outside.

• Closed Combustion
• 2 Models (30 and 40 gallon capacities)
• 30,000 BTU/Hr.

Features:

• Fully automatic controls
• Closed combustion vent kit package for installation flexibility
• Vitraglas® lining
• Factory installed dielectric waterway fittings
• Protective magnesium anode rod
• T&P relief valve opening
• Brass drain valve
• 1" Non-CFC foam insulation